1
/
of
1
MEGAWARE KEELGUARD
Megaware 27321 SkegGuard for Select Yamaha Models
Megaware 27321 SkegGuard for Select Yamaha Models
Regular price
$86.91 USD
Regular price
Sale price
$86.91 USD
Unit price
/
per
Shipping calculated at checkout.
Couldn't load pickup availability
Protect and prevent damage to your motor's skeg with the Megaware SkegGuard. The SkegGuard can also be used to repair and replace an already broken skeg with as little as 2-3 inches of skeg remaining. Available for many inboard/outboard motors such as Evinrude, Johnson, Force, Honda, Mercury, Mariner, Nissan, Tohatsu, OMC, Suzuki, Volvo and Yamaha motors.
THE INEXPENSIVE SOLUTION TO A BROKEN OR DAMAGED SKEG
MEGAWARE SKEGGUARD ENGINEERING
Constructed of high quality 18 gauge marine grade 316 stainless steel
Mirror Polished Finish
Reinforced 3mm lower wear tab protects against ramp dragging or damage from hidden debris
Conforms to your lower unit to ensure there is no discernible drag or compromise in performance
Drain hole on the bottom to prevent water from collecting and becoming stagnant and causing corrosion
Installs with as little as 2-3 inches of Skeg remaining
Do-it-yourself in less that 10 minutes
Comes with stainless steel self locking hardware and hex wrenches
Available for many inboard/outboard motors such as Evinrude, Johnson, Force, Honda, Mercury, Mariner, Nissan, Tohatsu, OMC, Suzuki, Volvo and Yamaha motors
Constructed of High Quality Marine Grade 316 Stainless Steel with a Mirror Polished Finish
Mirror Polished Finish for Long Lasting Shine
Constructed of high quality 18 gauge marine grade 316 stainless steel
Mirror Polished Finish
Installs with as little as 2-3 inches of Skeg remaining
Reinforced Wear Tab and Drainage Hole
Drain hole on the bottom to prevent water from collecting and becoming stagnant and causing corrosion
Thickened 3mm lower wear tab protects against ramp dragging or damage from hidden debris
Conforms to your lower unit to ensure there is no discernible drag or compromise in performance
Many Models Available for Virtually Any Skeg
Do-it-yourself in less that 10 minutes
Comes with stainless steel self locking hardware and hex wrenches
Available for many inboard outboard motors
EASY DO-IT-YOURSELF INSTALLATION IN 4 BASIC STEPS
1) Ensure proper fit
Prior to installing the Megaware SkegGuard visually make sure the model fits well with the skeg on your motor.
2) Skeg Preparation
Any spurs or jagged edges should be filed smooth so the SkegGuard can slide easily over the existing skeg.
3) Install SkegGuard
Using a rubber mallet, slide the SkegGuard onto the existing skeg and gently tap on it to get it started. Then drive it on with the mallet until it's fully seated.
4) Install Stainless Steel Hardware
Using the pre-drilled mounting holes on the SkegGuard as pilot holes, drill the skeg using a 1/4" drill bit.
Install the stainless steel hardware using the hex key supplied.
Avoid Expensive Repair Costs and Protect and Prevent Damage to Your Motor's Skeg
IMPORTANT!
When workin with this product, ALWAYS WEAR GLOVES to prevent injury to yourself and others. This product can and will cut your skin if not handled properly
The Megaware SkegGuard is NOT designed to prevent damage in the event of a collision impact with stationary objects. This product is designed to prevent and reduce wear and the amount of damage encountered while hitting minor floating objects or submerged stumps or rocks.
⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀
PROTECT YOUR WATERCRAFT WITH PREMIER PRODUCTS FROM MEGAWARE
A Commitment to Excellence in Product Development and Quality Standards
Megaware KeelGuard developed the industry’s first patented, do-it-yourself keel protector in 1992. As a family owned and operated business, Megaware continues to lead the industry in engineering, design and quality with their premier line of products - Keel Guard, Pontoon Guard, Skeg Guard, Skeg Pro, Scuff Buster, FlexStep Pro and BatteryGuard.
Through commitment to excellence in product development, quality standards, technology and customer support, Megaware KeelGuard has grown rapidly and is recognized as a worldwide supplier for the smallest fishing boats to the largest coast guard fleets.
As new technologies emerge, Megaware will incorporate these advancements to further enhance its line of cutting edge, easy-to-use products. Don’t trust your investment to anything less.
THE INEXPENSIVE SOLUTION TO A BROKEN OR DAMAGED SKEG
MEGAWARE SKEGGUARD ENGINEERING
Constructed of high quality 18 gauge marine grade 316 stainless steel
Mirror Polished Finish
Reinforced 3mm lower wear tab protects against ramp dragging or damage from hidden debris
Conforms to your lower unit to ensure there is no discernible drag or compromise in performance
Drain hole on the bottom to prevent water from collecting and becoming stagnant and causing corrosion
Installs with as little as 2-3 inches of Skeg remaining
Do-it-yourself in less that 10 minutes
Comes with stainless steel self locking hardware and hex wrenches
Available for many inboard/outboard motors such as Evinrude, Johnson, Force, Honda, Mercury, Mariner, Nissan, Tohatsu, OMC, Suzuki, Volvo and Yamaha motors
Constructed of High Quality Marine Grade 316 Stainless Steel with a Mirror Polished Finish
Mirror Polished Finish for Long Lasting Shine
Constructed of high quality 18 gauge marine grade 316 stainless steel
Mirror Polished Finish
Installs with as little as 2-3 inches of Skeg remaining
Reinforced Wear Tab and Drainage Hole
Drain hole on the bottom to prevent water from collecting and becoming stagnant and causing corrosion
Thickened 3mm lower wear tab protects against ramp dragging or damage from hidden debris
Conforms to your lower unit to ensure there is no discernible drag or compromise in performance
Many Models Available for Virtually Any Skeg
Do-it-yourself in less that 10 minutes
Comes with stainless steel self locking hardware and hex wrenches
Available for many inboard outboard motors
EASY DO-IT-YOURSELF INSTALLATION IN 4 BASIC STEPS
1) Ensure proper fit
Prior to installing the Megaware SkegGuard visually make sure the model fits well with the skeg on your motor.
2) Skeg Preparation
Any spurs or jagged edges should be filed smooth so the SkegGuard can slide easily over the existing skeg.
3) Install SkegGuard
Using a rubber mallet, slide the SkegGuard onto the existing skeg and gently tap on it to get it started. Then drive it on with the mallet until it's fully seated.
4) Install Stainless Steel Hardware
Using the pre-drilled mounting holes on the SkegGuard as pilot holes, drill the skeg using a 1/4" drill bit.
Install the stainless steel hardware using the hex key supplied.
Avoid Expensive Repair Costs and Protect and Prevent Damage to Your Motor's Skeg
IMPORTANT!
When workin with this product, ALWAYS WEAR GLOVES to prevent injury to yourself and others. This product can and will cut your skin if not handled properly
The Megaware SkegGuard is NOT designed to prevent damage in the event of a collision impact with stationary objects. This product is designed to prevent and reduce wear and the amount of damage encountered while hitting minor floating objects or submerged stumps or rocks.
⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀
PROTECT YOUR WATERCRAFT WITH PREMIER PRODUCTS FROM MEGAWARE
A Commitment to Excellence in Product Development and Quality Standards
Megaware KeelGuard developed the industry’s first patented, do-it-yourself keel protector in 1992. As a family owned and operated business, Megaware continues to lead the industry in engineering, design and quality with their premier line of products - Keel Guard, Pontoon Guard, Skeg Guard, Skeg Pro, Scuff Buster, FlexStep Pro and BatteryGuard.
Through commitment to excellence in product development, quality standards, technology and customer support, Megaware KeelGuard has grown rapidly and is recognized as a worldwide supplier for the smallest fishing boats to the largest coast guard fleets.
As new technologies emerge, Megaware will incorporate these advancements to further enhance its line of cutting edge, easy-to-use products. Don’t trust your investment to anything less.
- PROTECTS Your Skeg from Harsh Marine Environment; Thickened Lower Wear Tab PROTECTS Against Ramp Dragging.
- Made of DURABLE, Mirror-POLISHED 18-Gauge Marine-Grade 316 Stainless Steel.
- CONFORMS to your Skeg, No Discernable Drag or Compromise in Performance; Drain Hole to PREVENT Water from Collecting and Causing Corrosion or Freezing.
- DO-IT-YOURSELF Install in Under 10 Minutes; REPLACES a Broken Skeg with as Little as 2-3 Inches of Skeg Remaining.
- Avoid Expensive Repair Costs; 3-Year Manufacturer WARRANTY.
Share
